Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ultimate Ediabas/ISTA+ voltage control V3
06-02-2017, 17:03 PM,
(This post was last modified: 06-02-2017, 17:04 PM by Node.)
Post: #9
|
|||
|
|||
RE: Ultimate ediabas voltage control
808AWD325xi,
Thank you for the work you've done. This indeed was my idea to handle voltage reading done directly by the interface. Since release I found one additional call which seems to return true/false values for ignition and power, but neither of those seem to be actually used by ISTA+. By looking at the code of ISTA+ I saw that KL15 and KL30 values are only displayed for an ICOM. There is some code also specific for PTT and FUNK interfaces. I don't have access to any car with K-Line at the moment, but tomorrow there hopefully will be one and I will try to see it ISTA+ can be fooled somehow. Not yet sure how it detects ignition changeover for non-ICOM interfaces as well (for ICOM it seems to use voltages measured by ICOM itself, so I hoped it uses the same way for other interfaces). There is clearly work to done yet. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
25 Guest(s)
25 Guest(s)
Return to TopReturn to Content