Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ultimate Ediabas/ISTA+ voltage control V3
04-11-2018, 10:29 AM,
Post: #201
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Do this work with ista-p and k+dcan cable?
|
|||
04-11-2018, 11:15 AM,
Post: #202
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
|
|||
07-11-2018, 13:24 PM,
(This post was last modified: 07-11-2018, 14:13 PM by e46ad.)
Post: #203
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
HI i am using ISTA + Standalone,
My Edabias says, Inside C:\Rheingold\Ediabas\BIN/EDIBAS Interface = REMOTE OBD32.dll renamed to OBD32.edas.dll copy new OBD32.dll to C:\Rheingold\Ediabas\BIN/EDIBAS Copy NordISTA to C:\Rheingold\Ediabas\BIN/EDIBAS Replaced ISTAoporations in folder, Ran the 64bit reg file, LOaded Volts car won#t show |
|||
07-11-2018, 14:49 PM,
Post: #204
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Working perfrct on 4.13.14 Thank you! + Thanks
|
|||
10-11-2018, 09:32 AM,
Post: #205
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Well I have been using this and didn't click on for 3 days that this caused problems until both my cars were checked and both threw the same fault codes. It caused my E60 to throw a S0706 code for a module that doesn't exist and I coudln't get to the bottom of it until my R55 mini had the same code but had the module installed to check.
If I ran the program with the ignition off I get a S0706 code "central gateway supply (terminal 15 missing) I then figured out if I put the ignition on I get no error. This is only with the modified DLL with the app off so it detects clamp states (fantastic mod by the way) |
|||
14-11-2018, 23:08 PM,
Post: #206
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Who can remote install it for me with team viewer
|
|||
15-11-2018, 03:46 AM,
Post: #207
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
will your release for 4.14.20 work with
https://cartechnology.co.uk/showthread.p...#pid391415 just wondering ? left bb88 info as well as cant test till you release thanks again for all you great work you & bb88 ! |
|||
15-11-2018, 07:32 AM,
Post: #208
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Just got back from business trip. Will probably release in the evening.
|
|||
15-11-2018, 21:02 PM,
Post: #209
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Support for v4.14.20 added.
|
|||
Reputation: +5 - DJenka [+1] , simonchs [+1] , Bimmer540 [+1] , beemered [+1] , BMWS1000RR [+1] | |||
21-11-2018, 19:17 PM,
Post: #210
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Support for v4.14.30 added.
|
|||
Reputation: +5 - beemered [+1] , Bimmer540 [+1] , Sedoy [+1] , DJenka [+1] , simonchs [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Return to TopReturn to Content