Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ultimate Ediabas/ISTA+ voltage control V3
|
14-06-2019, 21:05 PM,
Post: #251
|
|||
|
|||
|
RE: Ultimate Ediabas/ISTA+ voltage control V3
v4.17.41 support added.
|
|||
| Reputation: +5 - Bimmer540 [+1] , simonchs [+1] , Twoone [+1] , DJenka [+1] , Jutoo [+1] | |||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
26-06-2019, 20:26 PM,
Post: #252
|
|||
|
|||
|
RE: Ultimate Ediabas/ISTA+ voltage control V3
Does it supports ista P 3.66.1 ?
|
|||
|
|
|
29-06-2019, 12:00 PM,
Post: #253
|
|||
|
|||
|
RE: Ultimate Ediabas/ISTA+ voltage control V3
Support for v4.18.14 added.
For ISTA-P voltage control - as far as I remember ISTA-P loader by beemerboy88 supports that. |
|||
| Reputation: +5 - Sedoy [+1] , Bimmer540 [+1] , DJenka [+1] , Twoone [+1] , E60 [+1] | |||
|
|
|
18-07-2019, 15:48 PM,
Post: #254
|
|||
|
|||
|
RE: Ultimate Ediabas/ISTA+ voltage control V3
Support for v4.18.24 added.
|
|||
| Reputation: +4 - Sedoy [+1] , Bimmer540 [+1] , simonchs [+1] , DJenka [+1] | |||
|
|
|
20-07-2019, 13:04 PM,
Post: #255
|
|||
|
|||
|
RE: Ultimate Ediabas/ISTA+ voltage control V3
Hello everyone!
 I tried this v3 plugin. First I renamed\ copied appropriately .dll, .exe, the right "IstaOperation.exe" for my version of ISTA + (v.4.17.13) and I have properly recorded the .reg files of the package. Well, run ISTA+ (I use K+Dcan cable, with BMW E90 LCI car year 2009), and WITHOUT also run "NodeEdiabasVoltageControl.exe" read correctly within ISTA+ at the top right the voltage values for K15 and K30. K15 = 13.5v K30 = 13.7v But one question: these values are static, always the same and I don't think they are in real time compared to the real voltage of the car, they don't seem to update themselves properly. Where am I wrong? Or do you need to run ISTA+ together with "NodeEdiabasVoltageControl.exe" to read real time values? Thanks guys to those who want to answer me. 
|
|||
|
|
|
20-07-2019, 13:07 PM,
(This post was last modified: 20-07-2019, 13:09 PM by Node.)
Post: #256
|
|||
|
|||
|
RE: Ultimate Ediabas/ISTA+ voltage control V3
K+DCAN cable DOES NOT HAVE proper circuitry to measure voltages!!! So when control app is not started you get predefined substitute values of 13.5V and 13.7V.
SOME K+DCAN cables DO HAVE circuitry to detect ignition on/off so if your cable is capable of that you get 0/13.5V depending on ignition status automatically. So no way to get real voltages with K+DCAN cable. And everything is working as it should. |
|||
|
|
|
20-07-2019, 13:51 PM,
(This post was last modified: 20-07-2019, 14:41 PM by bixiomauri_66.)
Post: #257
|
|||
|
|||
|
RE: Ultimate Ediabas/ISTA+ voltage control V3
@Node
Sorry if ask again: I assume that with my K+Dcan cable even with INPA and your plugin can't detect K15 and K30 voltages, right? Thanks |
|||
|
|
|
20-07-2019, 15:40 PM,
Post: #258
|
|||
|
|||
|
RE: Ultimate Ediabas/ISTA+ voltage control V3
No. The cable itself can't measure it. You can go into most unit statuses (with both INPA and ISTA) and read voltages from there, but those voltages will be as seen by those units not as seen by the cable. And if there are any problems in a car, those may be well off the true values.
|
|||
|
|
|
01-08-2019, 21:21 PM,
Post: #259
|
|||
|
|||
|
RE: Ultimate Ediabas/ISTA+ voltage control V3
Hi.. Does it work with ICOM A? Thanks
|
|||
|
|
|
01-08-2019, 21:37 PM,
Post: #260
|
|||
|
|||
|
RE: Ultimate Ediabas/ISTA+ voltage control V3
Why would you need it with ICOM? ISTA has native support for it.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
15 Guest(s)
15 Guest(s)
Return to TopReturn to Content
