Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
【 Aged Thread 】 Porsche cayenne immo off
08-06-2017, 12:04 PM,
(This post was last modified: 08-06-2017, 12:06 PM by adel.nooh.)
Post: #11
|
|||
|
|||
RE: Porsche cayenne immo off
(08-06-2017, 01:29 AM)CHIKODIAG Wrote: HI The key is with blade, the owner of car changed the ignition switch without benefit, cluster keeps off except the middle display show (immobilzer Active) and when turn key nothing occured (no leds in cluster and no sound of march). kessy module seems ok, when i disconnect it an error appear in cluster and key stuck in the ignition whatever i turn it to left or right (even wait for 10seconds) - the 2 mosfets and 6 resistors all are okkay. [SO KESSY is OK]. Which fuse i should look for ? If i make immo off for ECU, you dont think the car will start ? I thought there is a problem in OBD2 port which make scanners cant detect any module even there is a power in the obd2 port. |
|||
08-06-2017, 13:36 PM,
Post: #12
|
|||
|
|||
RE: Porsche cayenne immo off
Hi
Check the can lines in obd socket Sometimes the can lines break down Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
Reputation: +1 - dabaca [+1] | |||
09-06-2017, 01:04 AM,
Post: #13
|
|||
|
|||
RE: Porsche cayenne immo off
HI
MR:RAFFY hase a good point for mi i wich you GOOD LUCK because in this you need a good loksmither and im not GOOD LUCK |
|||
Reputation: +1 - dabaca [+1] | |||
10-06-2017, 00:45 AM,
Post: #14
|
|||
|
|||
RE: Porsche cayenne immo off
(08-06-2017, 13:36 PM)raffy haddad Wrote: Hi It is bosch ME7.5 I checked today 12v gnd and kline between obd2 port and ECU socket ... all are ok. I check the important fuses ... ok. I make a jumper between fuse 26 (kessy)and 36 (12v) and cluster leds turn ON but fvdi cant read any module. I try to learn a key by fvdi there is a response occured in cluster and the key make now click sound when enter it and cluster give lights without using jumper between fuses 26 and 36. That happened only when i press brake pedal during the process of learning key. Car lights keep blinking and strange sounds occured when i try to run the car but it wont start and then after 1 minute it return to initial state ... no lights and immobilzer active message appears again. Any ideas ? |
|||
11-06-2017, 16:45 PM,
(This post was last modified: 11-06-2017, 16:45 PM by adel.nooh.)
Post: #15
|
|||
|
|||
RE: Porsche cayenne immo off
Porsche Cayenne 2004
The ECU is Bosch ME 7.1.1 EEPROM 95P08 (5P08C3) Can any one give me immo off ? |