[Shooting]

Can some please give me the drawings to show me how to read both the eeprom and nec i have alot of radios to do so help is needed thanks

READING NEC Processor
===============

Connect the device to your PC through any adapter COM - Rx Tx (MAX232) or USB - Rx Tx (FT232, FT245 and others.).
Solder between the button and the point Masa RESET.
Radio RxD - TxD adapter, data from the PC to the radio.
Radio TxD - RxD adapter, the data from the radio to the PC.
Radio is connected to 12 V, off.
Post 5 V through a resistor 100 Om on the point MODE
(or 12 V via a resistor 12 kOm as shown).
1 sec. press RESET.
Run this program NEC D70F33xx Reader.exe (Download from Post #1), select the desired port number
press INIT, then Read. Save the file and send
along with the 95128 dump.

To switch the radio to normal mode to disable 5V MODE and press the RESET.