Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Carprog 5.46 " no response from unit" error
05-03-2014, 05:58 AM,
Post: #1
|
|||
|
|||
Carprog 5.46 " no response from unit" error
Carprog 5.46 " no response from unit" error how can i fix it this error ? Thanks !
|
|||
09-04-2014, 08:22 AM,
Post: #2
|
|||
|
|||
RE: Carprog 5.46 " no response from unit" error
|
|||
09-04-2014, 08:28 AM,
Post: #3
|
|||
|
|||
RE: Carprog 5.46 " no response from unit" error
Or A1cable is dead
Discount for CarTechnology forum members , 500 000 EVC reseller projects.
You can register on our File Service CLICK HERE FOR FILE SERVICE |
|||
09-04-2014, 17:06 PM,
Post: #4
|
|||
|
|||
RE: Carprog 5.46 " no response from unit" error
How did it happen that stopped working? Check quartz, power supply output voltage regulator and capacitor 47uF.
|
|||
14-04-2014, 20:47 PM,
Post: #5
|
|||
|
|||
RE: Carprog 5.46 " no response from unit" error
I have a problem in my CARPROG give error seen in all operations.
The error and the following:no response from dash Anyone ever had or know what it might be? |
|||
12-11-2016, 20:54 PM,
Post: #6
|
|||
|
|||
RE: Carprog 5.46 " no response from unit" error
Hello all I to get this error but only if I run d1 and a9 hardware test it fails with no response error if I run normal a9 test all is fine but if I run d1 a9 test then try to run a9 after it gives this error for a9 test also I'm sure it used work but it's not working now. unplugging and plugging in again works and a9 test will work again but not D1 a9 test
If mine or others posts and info are helpful please give thanks/rep
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content