Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ksuite 2.23 for reworked Kess and KTAG
|
26-04-2018, 19:50 PM,
(This post was last modified: 26-04-2018, 19:53 PM by bmwadriatic.)
Post: #1
|
|||
|
|||
|
Ksuite 2.23 for reworked Kess and KTAG
Hello there,
i send my Kess 5.017 (china red PCB) and KTAG 7.020 (also china red PCB) to one user here from CT to make rework for me. Today i got the tools back, but now i am asking myself if i have to use an other Ksuite Setup to install the software or use the China Software I became with the tools before the rework ? I contacted the user who made my rework, but he didnt answer to me. So i have to use an other Setup to install KSuite 2.23 or use the chinese CD Setup ? Dont want to brick the fresh reworked tools or something else. Thank you |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
26-04-2018, 20:21 PM,
(This post was last modified: 26-04-2018, 20:34 PM by ltujustas.)
Post: #2
|
|||
|
|||
|
RE: Ksuite 2.23 for reworked Kess and KTAG
Doesn't matter, EU clone or China clone using the same SW. If you install SW which you used before reworking, you will have ksuite 2.13 software just. Install 2.23 without any doubt. Reworked tools can work with an old sw, and with a new one 2.23
|
|||
| Reputation: +1 - bmwadriatic [+1] | |||
|
|
|
26-04-2018, 20:25 PM,
Post: #3
|
|||
|
|||
|
RE: Ksuite 2.23 for reworked Kess and KTAG
Thank you mate. You maybe have a link for tested ksuite 2.23 ? I don’t trust the software on cd.
|
|||
|
|
|
26-04-2018, 20:44 PM,
(This post was last modified: 26-04-2018, 20:49 PM by ltujustas.)
Post: #4
|
|||
|
|||
|
RE: Ksuite 2.23 for reworked Kess and KTAG
without help documents.
 if need help documents, tommorow will put her help from 2.23
|