[daiyan]

Helleo members, i hope somebody can help me, my bsi on peugeot 307sw 1.6 2004 is damaged totaly, i got a second hand bsi with same fn number but how can i get this to work with my car? can somebody program this for me?

my bsi info is:
FNR: 9657797580 A
FNC: 9657796880 A
Valeo Bsi J03-00
Ref. Ann: A12120
29/06/04 18:09
Controle: 2 5
Boot: 9.31
Cmd: 00031646160604
Puissance: 1325290604

chassis number for this car is: VF33HNFUB83756064

this info is for my origianl bsi.

I have digiprog 3 but i do not know how to use it.

Please help me.

Best Regards

Daiyan

[darek_naprawa]

Read memory from the old batch and upload the new order is the easiest way.

[daiyan]

Is it any tutorial to wich chip it is and how to do that? the bsi inside i melted i do not how it happend. any pictures of how to do?

[darek_naprawa]

In digiprog have a description of how podłaczyć.Odczyt memory record in digiprog and then record the second BSI.

[daiyan]

In digiprog have a description of how podłaczyć.Odczyt memory record in digiprog and then record the second BSI.

problem is that the bsi is melted and damaged, the digiprog says plug 1 but i do not understand what is plg 1? do you have any idea? i dont think it wil help to solder on cables because many of chips felt of when the motherboard mekted but can i desolder and read the chips? i have valeo bsi wiich chip shuld i desolder? and were is it located?

[McMihai]

Helleo members, i hope somebody can help me, my bsi on peugeot 307sw 1.6 2004 is damaged totaly, i got a second hand bsi with same fn number but how can i get this to work with my car? can somebody program this for me?

my bsi info is:
FNR: 9657797580 A
FNC: 9657796880 A
Valeo Bsi J03-00
Ref. Ann: A12120
29/06/04 18:09
Controle: 2 5
Boot: 9.31
Cmd: 00031646160604
Puissance: 1325290604

this info is for my origianl bsi.

I have digiprog 3 but i do not know how to use it.

Please help me.

Best Regards

Daiyan

looking EEPROM. 95160, unsolder the old one and mount it in the new bsi. If you do not find the 95160's seek 912DG128

[daiyan]

Do youknnow were it is located?

Helleo members, i hope somebody can help me, my bsi on peugeot 307sw 1.6 2004 is damaged totaly, i got a second hand bsi with same fn number but how can i get this to work with my car? can somebody program this for me?

my bsi info is:
FNR: 9657797580 A
FNC: 9657796880 A
Valeo Bsi J03-00
Ref. Ann: A12120
29/06/04 18:09
Controle: 2 5
Boot: 9.31
Cmd: 00031646160604
Puissance: 1325290604

this info is for my origianl bsi.

I have digiprog 3 but i do not know how to use it.

Please help me.

Best Regards

Daiyan

looking EEPROM. 95160, unsolder the old one and mount it in the new bsi. If you do not find the 95160's seek 912DG128

[McMihai]

    [quote='daiyan' pid='46998' dateline='1403728643']
Do youknnow were it is located?

not know the correct location

you have to open the bsi, sometimes you have to break the case, open the old carefully and you'll find it. on next so you'll know where this

[daiyan]

[quote='daiyan' pid='46998' dateline='1403728643']
Do youknnow were it is located?

not know the correct location

you have to open the bsi, sometimes you have to break the case, open the old carefully and you'll find it. on next so you'll know where this

it is some type os black layer on chips so i cant red the numbers on them.

---

i found the chip but when i read it with digiprog 3 eeprom obtion it just show fff on every line??? what to do?? were should the red cable on clip be on the chip?

---

please someone????

[McMihai]

I found the chip but when i read it with digiprog 3 eeprom obtion it just show fff on every line??? what to do?? were should the red cable on clip be on the chip?

---

please someone????
[/quote]

let's see Daiyan. is easier to change the eeprom from one unit to the other. than reading and writing, most of the time to do this you need desoldering eeprom


fussed all by yourself, or you really want to change the Km