Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E88 rolover protection(internal falt)
08-08-2019, 16:55 PM,
(This post was last modified: 08-08-2019, 18:02 PM by rs@chip.)
Post: #1
|
|||
|
|||
E88 rolover protection(internal falt)
hi bmw experts.. I have E88 convertable 2009 here and top wont move doun,not iven start to open windows.I checked faults in CVM and other modules not present, temp sensor,fuses,oil level in hidraulic motor also checked.update I-level and code complete car did not solve neither. only one fault present in acsm module (rolover protection internal error) but If I remember corect I had crashed e88 before and top was moving iven with airbags deployed any ideas guys? could be ACSM module prevent soft top function ?
here is ACSM2 ecu data if someone have ori/clear dump: BOSCH 0 285 010 253 65.77-9189996-01 eeprom st95128 thanks ! |
|||
08-08-2019, 17:53 PM,
Post: #2
|
|||
|
|||
RE: E88 rolover protection(internal falt)
rollover must be OK to get it work
|
|||
08-08-2019, 20:47 PM,
Post: #3
|
|||
|
|||
RE: E88 rolover protection(internal falt)
(08-08-2019, 16:55 PM)rs@chip Wrote: hi bmw experts.. I have E88 convertable 2009 here and top wont move doun,not iven start to open windows.I checked faults in CVM and other modules not present, temp sensor,fuses,oil level in hidraulic motor also checked.update I-level and code complete car did not solve neither. only one fault present in acsm module (rolover protection internal error) but If I remember corect I had crashed e88 before and top was moving iven with airbags deployed any ideas guys? could be ACSM module prevent soft top function ?Read your eeprom and post here, will try to clear. |
|||
08-08-2019, 21:39 PM,
(This post was last modified: 08-08-2019, 21:42 PM by BobbySD.)
Post: #4
|
|||
|
|||
RE: E88 rolover protection(internal falt)
I can also help you with clearing. I was doing this yesterday on E93 haha just post your eeprom.
and for your question, no, this fault dont have any influence on roof movement. At least this is my experience from E93 where with this fault roof was working just normal. Maybe E88 behavior could be different but I doubt about it. Problem will be probably somewhere else mechanical / electrical. Microswitches mostly dies on those. Try to diagnose with ista/inpa and check live data for all sensors and switches. |
|||
Reputation: +1 - rs@chip [+1] | |||
08-08-2019, 23:56 PM,
Post: #5
|
|||
|
|||
RE: E88 rolover protection(internal falt)
(08-08-2019, 21:39 PM)BobbySD Wrote: I can also help you with clearing. I was doing this yesterday on E93 haha just post your eeprom. yes mate I was also 99% sure I had same car before with crash faults and functional roof.. I alredy check all in ISTA not showing any problem (except acsm) check all terminals and sensors seems to be fine.. but ok I need to clear this fault anyway so will test tomorow with good dump |
|||
09-08-2019, 06:20 AM,
Post: #6
|
|||
|
|||
RE: E88 rolover protection(internal falt)
Try re-initialising windows too if you haven't already
|
|||
09-08-2019, 16:10 PM,
Post: #7
|
|||
|
|||
RE: E88 rolover protection(internal falt)
(08-08-2019, 21:39 PM)BobbySD Wrote: I can also help you with clearing. I was doing this yesterday on E93 haha just post your eeprom. clear it than here is... |