[victorysatgr]

Pcmflash 67_1 1.20ver

With original scanmatik 2 pro

Renault megane with sid305 auto

Not working, I.d. ok but when try to read it shows ecu high temperature....

EDIT: i activate the license in ori and i have the same result......

so i guess and with clone it should work....

[auto_tech]

Pcmflash 1.21ver
with clone sm2
logan 1.4 ems 3132 obd R/W ok
caddy cayd 1.6 pcr 2.1 R/W ok (unlock eeprom with beeprog and unlocker)

[sanndo]

Pcmflash 67_1 1.20ver

With original scanmatik 2 pro

Renault megane with sid305 auto

Not working, I.d. ok but when try to read it shows ecu high temperature....

EDIT: i activate the license in ori and i have the same result......

so i guess and with clone it should work....

Strange.. I has done this ecu on renault 3-4 times with clone 1.2 and ori and work fine. But use my ucds adapter, not scanmatik

Code:

Interface: UCDS J2534
DLL: 4.03-8 build 21122019
Firmware: UCDS V3\V4 Firmware: v.16
Protocol: Renault: 1.5L dCi SID 305/306 (TC1766/1504KB)
Identification
VIN: VF1BZLLD653450267
Hardware: 0669R
Calibration: 6137R
Base: 3956R
Protocol: Siemens/VDO/Continental [45]
Completed

[ttkkas01]

Did a BMW Bosch 6HP clone 1:1 with pcmflash original module 77 and original scanmatik 2 pro, all went good

I also have clone pcmflash and mostly use with gen 1 and 2 Toyota, never had issues, but for gen 3 2020+ I wouldn't recommend clone pcmflash, better to use original pcmflash with gen 3 Toyota or can cost you a lot of money

[ROD-BENDERS]

Pcmflash 1.21 module 71

Psa edc17c60 read write ok

No problems with tprot, unlike 1.20 it seems this problem was solved with china dongle 1.21

Br

[ttkkas01]

Pcmflash 1.21  module 71

Psa edc17c60 read write ok

No problems with tprot, unlike 1.20 it seems this problem was solved with china dongle 1.21

Br

.........................................

[Cowboy]

Hello! I bought SM2Pro + Clon. I'm trying to read it on the EDC17C50 bench. According to the diagram from PCMtuner, I should connect GPT0 and GPT1. On my cable (with three diodes and a switch) I only have GPT1 and GPT2. Can anyone tell me how to connect? Thank you in advance and best regards!
edit
I've already decoded everything: GPT 0 is GPT1 on my cable. I also learned what this switch is for and which + cables need to be connected for the automatic function to work properly.
To sum up, it works as it should. I read BMW's EDC17C50 and compared it with the reading made by AMT BST (the files are the same).

[victor2k]

Hello,
I have pcmflash module 77 and sm2pro original,what cable I must buy to clone edc16cp39 Citroen?Only original bench cable or work also with the chinese clone?
Thank you

[YGRemaps]

Hi all i have little info for clone pcmflash ( i have autotuner and flex, but all time i need information from clone tools like pcm and have same kt200 what can do it ) i need information about 35 module for toyota denso 76F00xx can do it by obd with VR file and fan working or not how much time need to write if can ( kt200 have VR and write i just ask for pcmflash ) tnx

[victorysatgr]

Pcmflash 67_1 1.20ver

With original scanmatik 2 pro

Renault megane with sid305 auto

Not working, I.d. ok but when try to read it shows ecu high temperature....

EDIT: i activate the license in ori and i have the same result......

so i guess and with clone it should work....

Strange.. I has done this ecu on renault 3-4 times with clone 1.2 and ori and work fine. But use my ucds adapter, not scanmatik

Code:

Interface: UCDS J2534
DLL: 4.03-8 build 21122019
Firmware: UCDS V3\V4 Firmware: v.16
Protocol: Renault: 1.5L dCi SID 305/306 (TC1766/1504KB)
Identification
VIN: VF1BZLLD653450267
Hardware: 0669R
Calibration: 6137R
Base: 3956R
Protocol: Siemens/VDO/Continental [45]
Completed

the trick is to read-write the ecu in the firsts secs when put card on slot......  when the immo goes inactive then you can't connect with ecu....