[Burnout]

Hi m8, 

I have read this dashboard with R270.
Can someone change odometer to 140000km ?

I hope their will be no problem with the car that I disconneted Dashboard (heard much about Problems with the security of immo)ä

In which line is stored odometer on Magnetti Marelli? On VDO its always the first 4lines.. here I dont find it

old odometer is about 195000km

Thanks in advance

eeprom fox and flash.zip
File Type:
Downloaded:	8 times
Size:	57.82 KB

[Vovk1962]

mileage is from 0600 to 07e0
for example for 140000 put
08570000f7a8ffff .......

[Pentheus]

Here you can try 

[Burnout]

Hi, yesterday everything works fine with new odometer.
Today dash not work and IMMO is on.
What should I do?
I have read that it can be a code for Immo or something?

[Pentheus]

what dtc are stored? PIN 06112

[Burnout]

what dtc are stored? PIN 06112

Something with the Dashboard, man this little car kills me…
Yesterday everything worked.. have build speedometer, everything is fine. New km everything.
Today dash is dead, and car don’t start. Immo is active..


On bmw or Mercedes I Never had problems with disconnecting dash or something, on this little car I had read much that often have problems if I disconnect dash with car battery conmected..

[Pentheus]

Try dash on table, reflash again and check for cold joints. And answer accordingly if the problem has been solved

[Burnout]

Try dash on table, reflash again and check for cold joints. And answer accordingly if the problem has been solved

Thanks bro, after synchronization it works now! Thank you mate!

How can I make ECU? Just make dump from eeprom? Which line is the mileage on the ecu?

Best regards

Mike

[racing]

what dtc are stored? PIN 06112

I know that it is an old thread. What sw do you used to extract PIN and correct km?