Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ford Focus 2.0 Tdci Sid206 2009 need help
11-12-2022, 14:31 PM,
Post: #1
|
|||
|
|||
Ford Focus 2.0 Tdci Sid206 2009 need help
Hello everyone, men of the car Pcm Ford Focus 2.0 Tdci Sid206 2009 changed the box to the mechanics
When the engine starts, the speed rises sharply and the car in emergency mode the jack burns; when the error is cleared, the jack goes out, appears at startup, auto runs normal Native firmware 8M51-12A650-AJG, What firmware is suitable for this unit for mechanics, on the sites of this particular car 2 liters there is no mechanics I tried to flash from 1.8 7M51BCG / 8V41CC Elm config writes at the end it says the error doesn’t fit, I put everything back in my ok, I tried to manually disconnect the elmconfig in the config, it doesn’t work when loading, but the mechanic burns when loading, it did on gas max and diesel focus, the error really remained, but the jack did not burn and the speed was normal, but here this option does not work Help pliz which firmware is suitable from the mechanics? Thanks in advance |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content