[12manux]

hi guys.so i have a 2011 phaeton with flooded kessy.Cleaned it but no result.

Customer got another kessy same partnumber,i readed with vvdiprog eeprom of old kessy and new kessy .

i also tried with odis but since i cannot put ignition on it will not calculate test plan for it.



anyone might help me??

attached i put eeprom files of both kessys

kesssy.rar
File Type:
Downloaded:	12 times
Size:	2.27 KB

[ROD-BENDERS]

hi guys.so i have a 2011 phaeton with flooded kessy.Cleaned it but no result.

Customer got another kessy same partnumber,i readed with vvdiprog eeprom of old kessy and new kessy .

i also tried with odis but since i cannot put ignition on it will not calculate test plan for it.



anyone might help me??

attached i put eeprom files of both kessys

Continental kessy is crypted, reading and copying eprom will just corrupt the kessy.

The only tool that can do this is tmpro2 with continental kessy module, its expensive.

Br

[lupu_sandu]

Nope. Is not true.

[badenaleks]

You need to read the original and replacement kessy with VVDIProg and adapt by VVDI2, another way to adapt by ODIS.

[faraday]

You need to read the original and replacement kessy with VVDIProg and adapt by VVDI2, another way to adapt by ODIS.

Have you successfully adapt secondhand kessy by VVDI2?

[badenaleks]

You have to read both the Original and Replacement with VVDIProg and after you can calculate CS+PIN with VVDI2, after that you can go to module adaptation in VVDI2. 
Or faster and more safely to do it with ODIS

[lupu_sandu]

You need to read the original and replacement kessy with VVDIProg and adapt by VVDI2, another way to adapt by ODIS.

Have you successfully adapt secondhand kessy by VVDI2?

I replace a kessy continental by vvdi2 on a Bentley GT.
PS: You cannot adapt anymore SH kessy with ODIS.

[lupu_sandu]

@12Manux, read and post ecu dump please. Seems that your original dump is corrupted.

On sh unit i see:

CS: 5900A558B2014A
Pin: 15184

[rezt]

hi guys.so i have a 2011 phaeton with flooded kessy.Cleaned it but no result.

Customer got another kessy same partnumber,i readed with vvdiprog eeprom of old kessy and new kessy .

i also tried with odis but since i cannot put ignition on it will not calculate test plan for it.



anyone might help me??

attached i put eeprom files of both kessys

Pheaton have wake up can option if u drop keys in kessy. If i good remember hold brake pedal for some time when u made Odis diagnose. 

Second option is made jumepr on OBD 16 pin + 1 pin