[SkeYT]

Test and report. Pass pm

[bm92]

If you have tool32 you can find working hours, then look after the same hex (swapped bytes) then 0 working hours, after that you can default code

[EngineerX]

Test and report. Pass pm

I wrote it but i have again same error

[RocketSurgeon]

If you have tool32 you can find working hours, then look after the same hex (swapped bytes) then 0 working hours, after that you can default code

The working hours are usually expressed in minutes. Is it just the minutes encoded in hexadecimal with little-endian? I've struggled to extrapolate the hex value from the hours value.

[bmchicago]

1) need to reflash ECU, make sure it is the correct program number in ISTA/p.
2) need to modify d-flash to correct tampering counter / data

3) or do DTC off in ECU

[SkeYT]

Test and report. Pass pm

I wrote it but i have again same error

What was done that this error appeared and what is happening with the engine?

[ahmadarifai]

did you fix this? have same error on e71 car not starting.

[SkeYT]

Fully reflash ECU