[Liteace]

Have a problem with 2007 Mini one R56, the passenger window has stopped working, have code:


9CDB FRM: terminal 30B connection, power window, faulty

I have checked power for windows to FRM on pins 1 and 3 for, all good Ive also checked wires from FRM to windows motor in door and also all good, some say this is a software problem, can it be repaired?

The FRM is:

R56 HIGH
6135 3452092 - 01
SW: 58030
HW: 08

[user0086]

Have you checked if the window opens and closes when you directly apply 12v to the pins that go to the motor?
This version of FRM does not have the quadrature encoder that the newer FRMs have, so it just monitors the current.
If the window opens and closes correctly when 12v is applied and initialization with ISTA still fails, I suspect that the module has defective hardware.

[Liteace]

Yes the windows does open and close when I power it at the FRM plug also I can open and close drivers windows with scan tool so is it looking like FRM replacement needed ?

[jaramillo]

Try to flash/code the module, if it does not work change the module

[Liteace]

Try to flash/code the module, if it does not work change the module

Flash it with what?

[jaramillo]

Try to flash/code the module, if it does not work change the module

Flash it with what?

Flash with winkfp for example.. It's just a last step before replacing the module

[user0086]

If you flash with WinKFP, code it afterwards with NCS expert. Other methods like ISTA/Autel/Autologic etc. will flash and code at once.
You'll need to be able to do this anyway when you replace the FRM, so why not try it on your current frm.

[Liteace]

If you flash with WinKFP, code it afterwards with NCS expert. Other methods like ISTA/Autel/Autologic etc. will flash and code at once.
You'll need to be able to do this anyway when you replace the FRM, so why not try it on your current frm.

Thanks, I would need some step by step instructions on how to do this if poss?