[Liteace]

I have Nissan Quashqa 2.0d with engine control module 

bosch 0 281 014 859 / Nissan 23710 JD78E

it has codes  p0611 and p1612, I cant program the injectors and the engine wont start

here is the read from the eeprom 95320, is this corrupt, if so is there a virgin or a fix for this 

Thanks 

read.rar
File Type:
Downloaded:	10 times
Size:	824 bytes

[Abou-raffik]

hi bro 
try this

[Liteace]

I made as instructed but still the same problem, I have the red key/immo light on, the injectors will not take the code and still have the same P fault codes, does this need new engine control module ?

[Abou-raffik]

hi bro
first file should be worked 

try this file

[ombra]

tested solution if the problem is the eeprom with this solve 100%

[ombra]

solved you problem yes or not ?

[mihaiti]

Well, step by step he it what i have done:

After flashing, no key or code could have write back even i had made backup! Eeprom corrupt!
I have managed somehow with abrites to erase the key(red in dash, safe in display, no cranck).
0. Extract pin 9951 (with abrites) for cars unde 2010. With launch the pin appeard on sugestion/help .
1.Ecu on table,remove eeprom/read/write virgin
2.Write eeprom virgin for new key!(find in attach)
3.Ecu back on car, key learning with abrites or launch x431, or tool compatible (clip).
4.Now the P1612 error is gone, P0611, code injectors to car, gone as well.
Key with blade always keep in ingnition when do this jobs!

[raffy haddad]

And .... , the car start ?