Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F80 Cluster - setup
29-02-2024, 10:10 AM,
Post: #1
|
|||
|
|||
F80 Cluster - setup
Hi guys,
I've bought a F80 (M3) cluster that was converted from miles to km/h, it also has the rev limit LED. I can't seem to find any guide for coding the cluster and M-HUD to the car (F32). Take in note that I have 8HP AT, I've seen people made it work with 8HP and show proper fuel consumtion without the adapter.. Any help would be appreciated! I've got access to E-Sys and ISTA and the cluster was virginized by the seller. |
|||
25-03-2024, 01:15 AM,
Post: #2
|
|||
|
|||
RE: F80 Cluster - setup
M-HUD should work without any coding as the cluster is what controls HUD.
I haven't seen any causes of functional auto without the adapter. Can you link the ones you've seen? Have you tried injecting a CAFD with ESYS yet? If so, does it throw an error? |
|||
25-03-2024, 14:38 PM,
Post: #3
|
|||
|
|||
RE: F80 Cluster - setup
The cluster is virginized?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content