[MasterMulder]

Non

1698251117[/url]']
Did you flashed the virgin dump first to CD30, do you?

Good luck

Yes, flashed it on cd30 e verified it was virginized. But the problem is my opcom, I already had this problem. So i was curious if the marriage could have been done directly from the dump, putting the GID Pin in the cd30 dump (?)

Check if the security waiting time is activate.

Good luck

I attach the GID dump, if i Virgin it and I marry it with the CD30 Code (rewriting in it the original dump) is the same? Cause the opcom allow me to activate theft protection in GID and not in EHU CD30.

[Shooting]

Non

1698251117[/url]']
Did you flashed the virgin dump first to CD30, do you?

Good luck

Yes, flashed it on cd30 e verified it was virginized. But the problem is my opcom, I already had this problem. So i was curious if the marriage could have been done directly from the dump, putting the GID Pin in the cd30 dump (?)

Check if the security waiting time is activate.

Good luck

I attach the GID dump, if i Virgin it and I marry it with the CD30 Code (rewriting in it the original dump) is the same? Cause the opcom allow me to activate theft protection in GID and not in EHU CD30.

Ignore above, correct PIN is 6218, use my virgin dump and use 6218 to pair



wbr

[MasterMulder]

Non

1698251117[/url]']
Did you flashed the virgin dump first to CD30, do you?

Good luck

Yes, flashed it on cd30 e verified it was virginized. But the problem is my opcom, I already had this problem. So i was curious if the marriage could have been done directly from the dump, putting the GID Pin in the cd30 dump (?)

Check if the security waiting time is activate.


Good luck

I attach the GID dump, if i Virgin it and I marry it with the CD30 Code (rewriting in it the original dump) is the same? Cause the opcom allow me to activate theft protection in GID and not in EHU CD30.

Ignore above, correct PIN is 6218, use my virgin dump and use 6218 to pair



wbr

Hi, thanks. When i read the GID the code is 8126, that is the right opposite of 6218, surely my reading is incorrect. But I was wondering if I virgin the gid instead of the CD30 and then i marry the GID to the CD30 is the same? Cause my OPCOM only read GID and not CD30. I'm waiting a friend with TECH2.

thanks

[Shooting]

Non
Yes, flashed it on cd30 e verified it was virginized. But the problem is my opcom, I already had this problem. So i was curious if the marriage could have been done directly from the dump, putting the GID Pin in the cd30 dump (?)

Check if the security waiting time is activate.


Good luck

I attach the GID dump, if i Virgin it and I marry it with the CD30 Code (rewriting in it the original dump) is the same? Cause the opcom allow me to activate theft protection in GID and not in EHU CD30.

Ignore above, correct PIN is 6218, use my virgin dump and use 6218 to pair



wbr

Hi, thanks. When i read the GID the code is 8126, that is the right opposite of 6218, surely my reading is incorrect. But I was wondering if I virgin the gid instead of the CD30 and then i marry the GID to the CD30 is the same? Cause my OPCOM only read GID and not CD30. I'm waiting a friend with TECH2.

thanks

Use my dump from Post#2 and pair using 6218... use Opcom or any Opel tool


wbr