Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CG MB Renew EIS204 Problem
26-11-2023, 20:55 PM,
Post: #1
|
|||
|
|||
CG MB Renew EIS204 Problem
I'm trying to verify mileage on our 2011 Model W204. When I renew EIS204, it is still 195,000 km. I set the indicator as 180,000 km, but due to the EIS, it becomes 195,000 km again. When I remove the EIS and reset it as a bench, the km is 0. When I installed it in the vehicle, it was 195000 km again. I'm having problems with CG MB support. What can be the problem?
When I renew via obd while EIS204 is installed in the vehicle, km is never 0. By removing the EIS plug, I set the indicator to 180,000 km and it becomes permanent. Even though I reset the EIS as a bench, when I install it in the vehicle, KOMBI and EIS are 195000 km. I took a backup of CGW eeprom and flash just in case. When I install EIS on the vehicle, the mileage information does not change at all. Do you have any ideas about this? I reset EIS to bench. I wrote 0 km without EIS on the combi vehicle. I installed EIS and there is no problem with the vehicle, it remains at 0 km. When I wrote 180000 km on the Kombi with the Mileage repair function, it became 195000 km again. EIS HW: 2079052600 CGW HW: 2125451001 SW: 2129029904 IC204 HW: 2049017903 |