[jpimpao01]

Hi, I has an entrynav2 that has 170 FSC rejected. I tried use featureinstaller to retrofit NAV and carplay, but always become rejected FSC... I flashed it, still same.

It is an Alpine HWEL 96DD

Any ideia?!

RootCertStatus not available
SWSigStatus not available
SWTApplications
<--
FSCSCertStatus not available
FSCStatus not available
AppNr./UpgrIdx 274(0x112)/1(0x01)
SWTType SWTclassic light

<--
FSCSCertStatus not available
FSCStatus not available
AppNr./UpgrIdx 275(0x113)/1(0x01)
SWTType SWTclassic light

<--
FSCSCertStatus not available
FSCStatus not available
AppNr./UpgrIdx 277(0x115)/1(0x01)
SWTType SWTclassic light

<--
FSCSCertStatus not available
FSCStatus not available
AppNr./UpgrIdx 278(0x116)/1(0x01)
SWTType SWTclassic light

<--
FSCSCertStatus not available
FSCStatus not available
AppNr./UpgrIdx 156(0x9C)/1(0x01)
SWTType SWTclassic light

<--
FSCSCertStatus not available
FSCStatus not available
AppNr./UpgrIdx 111(0x6F)/1(0x01)
SWTType SWTclassic light

<--
FSCSCertStatus not available
FSCStatus not available
AppNr./UpgrIdx 323(0x143)/1(0x01)
SWTType SWTclassic light

<--
FSCSCertStatus not available
FSCStatus not available
AppNr./UpgrIdx 304(0x130)/8452(0x2104)
SWTType SWTclassic light

<--
FSCSCertStatus not available
FSCStatus not available
AppNr./UpgrIdx 365(0x16D)/1(0x01)
SWTType SWTclassic light

<--
FSCSCertStatus not available
FSCStatus rejected
AppNr./UpgrIdx 368(0x170)/2(0x02)
SWTType SWTclassic light

RoutineResult: OK

[jararak]

and how about remove component protecion?

[jpimpao01]

It says no Comoonent Protection

[jb2005]

It says no Comoonent Protection

Classic issue on FI. It needs to be fixed manually.

[Czozen]

Yeap. Hard to explain in few words. But I can help you by Remote in this case.

[laquangksxd]

1. Use Tool32 with job "steuern_routine","ARG;HU_FSC_REFURBISH_UI;RRR to check the REFURBISH vin. There will be 2 cases.
* Vin REFURBISH is similar to Vin BDC/FEM, only needs patching and FSC inject.
* REFURBISH vin is different from BDC/FEM vin you need to achieve open protection component status. To do this execute job "steuern_routine","ARG;HU_VIN_PROTECTION;STR and "steuern_routine","ARG;HU_VIN_PROTECTION_ENFORCE_CYCLIC;STR
After open protection component, proceed to patch and remove it and inject fsc.
2. If it still doesn't work and needs a patch, do fsc manually with ssh.