[ts_oleg13]

Hello! I replaced the rear lights on my bmw x3 g01 2019 usa with European ones. I successfully managed to code everything, everything works fine. but now i realize that i didn't run the wiring for the rear fog lights. I got an error on the dashboard that the rear fog lights don't work. I don't need them, there is no fog in the region where I live. can someone help me deactivate the rear fog lights so that the error from the dashboard goes away?

[TheNine90]

You disable the rear fogs, llok for NSL in the BDC. Or compare the USA and EU and you will see the NSL parameters

[moreply]

Look in NCD for NSL_L und NSL_R. NSL stands for Nebelschlussleuchte also Disable Hot/Cold Check in NCD for NSL L and R

[ts_oleg13]

I found the following settings in the BDC block and coded:
NSL_L_CCM
NCD1: ccm_372 (01,74)

NSL_L_UE_SPG_SCHUTZ
NCD1: затемнений (02)

NSL_R_CCM
NCD1: ccm_372 (01,74)

NSL_R_UE_SPG_SCHUTZ
NCD1: затемнений (02)

NSL_VERBAUT
NCD1: nicht_verbaut (00).

However, this did not help, I have errors: 805CAB, 805E2B.

[kimz]

G01 has factory fitted fog wires, even if it is from the USA. Your errors are related to sidemarkers (805CAB, 805E2B)

[ts_oleg13]

can you tell me how to turn off the side markers?

[ts_oleg13]

i turned off the side markers. maybe someone will need:
Check the value of FLM \ 3004 LmmB \ SIDEMRKLGT_Idx. It will be 12 bytes long and will look something like this:

[02 02 02 13 02 02 02 02 02 02 02 02]

So you would code SIDEMRKLGT_Idx to

[02 02 02 02 02 02 02 02 02 02 02 02]

---

i turned off the side markers. maybe someone will need:
Check the value of FLM \ 3004 LmmB \ SIDEMRKLGT_Idx. It will be 12 bytes long and will look something like this:

[02 02 02 13 02 02 02 02 02 02 02 02]

So you would code SIDEMRKLGT_Idx to

[02 02 02 02 02 02 02 02 02 02 02 02]