[spooky75]

Hello,


I would like to activate CCS on assistance menu on VC Gen1 (12" display) with SW: 3195.
I have only option to activate ACC and LIM, but no 3rd option for CCS.

Did I missed some coding or adaptation or newer SW: 4xxx is needed for this ?


Coding and adaptations:
---------------

13 - Radar [2Q0907572AB]
Byte 24 Bit 4 - checked in

17 - Instrument Cluster [5NA920790B]
IDE12226-MAS03686-Display of longitudinal regulation coordinator-Automatic distance regulation,active ,1
IDE12226-MAS05203-Display of longitudinal regulation coordinator-CCS,active ,1
IDE12226-MAS10720-Display of longitudinal regulation coordinator-Speed limiter,active ,1

   

[david99]

Hi Spooky75,

If I remember well I read somewhere that somebody was writing article about retrofitting capacitive steering wheel where SW 4xxx was needed also due to view button was able to enable your desired view. So I suppose 4xxx is needed.

David

[Versus]

3xxx firmware not support CCS option.

[spooky75]

Then I will change VC to 5NA920791C with 4131 and test.
Just waiting local VW authorized service to check approval thingies for used dash with VW.

Anyone have 5NA920790C 4131 update in SDCARD version ?

[greenhorn]

for CCS activation need v2 cluster with 5C immo... Forget it.

[spooky75]

for CCS activation need v2 cluster with 5C immo... Forget it.

Short and concise