Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ACC retrofit H10 5Q0907572H
27-02-2024, 09:25 AM,
(This post was last modified: 27-02-2024, 09:25 AM by KluthR.)
Post: #1
|
|||
|
|||
ACC retrofit H10 5Q0907572H
Hey!
I have an e-Golf 7 with radar and NO camera with NO Gra/CC and NO ACC (NO buttons in steering wheel as well). long story short: I thought one could simply retrofit the buttons and do some coding but I learned, that ACC is SWaP/FEC locked. Thanks VW... Anyway, I also learned that there are some magic methods and tricks to get FEC enabled. And since I want to learn how things work: I have VCDS, OBD11 and VNCI 6154A clone. Is this doable with this hardware? The MFL buttons are installed. Code: Adresse 13: Distanzregelung (J428) Labeldatei:| 5Q0-907-572-V2.clb I learned H10 is "easier" than any newer generation. Thanks in advance! P.S.: If needed: Code: Adresse 03: Bremsenelektronik (J104) Labeldatei: DRV\5Q0-907-379-OMG-V1.clb |
|||
01-03-2024, 15:44 PM,
Post: #2
|
|||
|
|||
RE: ACC retrofit H10 5Q0907572H
You need ori odis as well for CP.
Activate CP on new acc (just plug it in), flash x firmware. Remove CP and activate FeCs, flash ori fw.. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content