[evg_eni]

Load this file with your commander and write, just that.

[kafkaesk]

Load this file with your commander and write, just that.

Unfortunately, this doesn't work... And it seriously causes "weird" symptoms.
The cluster doesn't show "Immobiliser active" anymore, but when you read fault codes with VCDS, there are multiple faults in other ECU:

00-Lenkwinkelsensor -- Status: i.O. 0000
01-Motorelektronik -- Status: i.O. 0000
03-Bremsenelektronik -- Status: Fehler 0010
08-Klima-/Heizungsel. -- Status: i.O. 0000
09-Zentralelektrik -- Status: Fehler 0010
15-Airbag -- Status: i.O. 0000
16-Lenkradelektronik -- Status: i.O. 0000
17-Schalttafeleinsatz -- Status: Fehler 0010
19-Diagnoseinterface -- Status: Fehler 0010
25-Wegfahrsperre -- Status: i.O. 0000
42-Türelektr. Fahrer -- Status: Fehler 0010
44-Lenkhilfe -- Status: Fehler 0010
46-Komfortsystem -- Status: nicht erreichbar 1100
52-Türelektr. Beifahr. -- Status: Fehler 0010
56-Radio -- Status: i.O. 0000

When I program with K+CAN the "original" Immodata I read out of the fresh VDO, the "Immobilizer active" shows up again in the cluster, but there are no faults:

00-Lenkwinkelsensor -- Status: i.O. 0000
01-Motorelektronik -- Status: Fehler 0010
03-Bremsenelektronik -- Status: Fehler 0010
08-Klima-/Heizungsel. -- Status: i.O. 0000
09-Zentralelektrik -- Status: i.O. 0000
15-Airbag -- Status: i.O. 0000
16-Lenkradelektronik -- Status: i.O. 0000
17-Schalttafeleinsatz -- Status: i.O. 0000
19-Diagnoseinterface -- Status: i.O. 0000
25-Wegfahrsperre -- Status: i.O. 0000
42-Türelektr. Fahrer -- Status: i.O. 0000
44-Lenkhilfe -- Status: Fehler 0010
46-Komfortsystem -- Status: i.O. 0000
52-Türelektr. Beifahr. -- Status: i.O. 0000
56-Radio -- Status: i.O. 0000

Since I have both login codes, I tried to learn the Immobiliser with VCDS according to the instructions given on the Ross-Tech page (see links some posts before).
Everything works fine, both keys are correct, but in the end: The new VDO doesn't save the VIN.

[kafkaesk]

Okay... today I received my VNCI 6154A and I now have access to both ODIS versions.
Since I'm completely new to ODIS, how can I manage to revive the speedometer?

Greetings, Daniel.