+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: BMW E65 CAS , death in car after change milage with R270 (/showthread.php?tid=50794)
Pages:
1
2
BMW E65 CAS , death in car after change milage with R270 - jeroenbmw - 12-05-2019
Hi,
I readout my CAS with R270 tool i read eeprom and flash.
I change milage into eeprom and write it back, til that point no problem.
When connect cas into car, the cas not taking key and not possible to put ignition, its death.
When i connect back with R270 i can read and write without issue, but in car cas stay death.
Maby can someone check my original files that i read maby something is wrong
Part of cas is 61326972689 (5WK48020A)
In original file is KM 363xxx if file is corrupt can someone put 333530 in or something because i think problem is in files and not in cas self because r270 can read and write, and in car cas get power but not hold key and not go on ignition its as death as hell.
RE: BMW E65 CAS , death in car after change milage with R270 - MeMpHiSj - 12-05-2019
think your problem in reading flash! dont do that without reason, this operation corrupts flash
now try to find any working flash, programm it with r270 and then flash with winkfp right zb number
RE: BMW E65 CAS , death in car after change milage with R270 - jeroenbmw - 12-05-2019
(12-05-2019, 15:04 PM)MeMpHiSj Wrote: think your problem in reading flash! dont do that without reason, this operation corrupts flash
now try to find any working flash, programm it with r270 and then flash with winkfp right zb number
or try this from my archive (here is eeprom + flash) from 2004 e65
Hi my friend,
In first i did only read eeprom and change kM AND WRITE eeprom back after that is was death
When i write your eeprom and flash my keý's still stored? or are this not in flash or eeprom?
RE: BMW E65 CAS , death in car after change milage with R270 - MeMpHiSj - 12-05-2019
why your flash is 256kb instead of 2mb ?? is your cas answers in diagnose? (you dont need key inside for this)
dont try to put my files in cas, it is from 0k50e mcu
RE: BMW E65 CAS , death in car after change milage with R270 - jeroenbmw - 12-05-2019
Hi,
No in diagnose its complete death,
With R270 256kb is flash i read
So that should be 2MB?
R270 reconize cas as 2K79X
RE: BMW E65 CAS , death in car after change milage with R270 - MeMpHiSj - 12-05-2019
yes, flash should be 2mb! i check prod date of car, it is 2006 so cas really 2k79x, its ok.
so as i said first your problem in corrupted flash.
RE: BMW E65 CAS , death in car after change milage with R270 - jeroenbmw - 12-05-2019
I read with CG Prog Now, and also 256KB, CG prog tells 256KB is the flash file the PFLASH
RE: BMW E65 CAS , death in car after change milage with R270 - MeMpHiSj - 12-05-2019
sry, my fault, pflash is 256kb right. In first post dump are ori first read?
RE: BMW E65 CAS , death in car after change milage with R270 - jeroenbmw - 12-05-2019
Yes
But when i load this file in CG prog it tells KM are invalid so maby eeprom file is fucked by R270
I go home now tomorrow new day new Change
RE: BMW E65 CAS , death in car after change milage with R270 - MeMpHiSj - 12-05-2019
how i see key info are not corrupted, we can try to repair dump by working one.
btw vvdi2 calc didnt blame your dump, show vin, km and keys
next time when reading with r270 - try few times and compare files ))