+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 (/showthread.php?tid=89344)
Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 - ClmPsr14 - 25-02-2024
Good morning,
I am currently working on Ford Fusion 1.6 TDCi 90 hp year 2005 (HHJB engine), which is equiped by Bosch EDC16C34 ecu.
The car no longer wants to start due to an immobilizer failure.
I tried several immobilizer removal software, no one offered me solution for this type of ECU on Ford.
Is there a solution to remove immo on this type of ECU?
Fiat Peugeot or Citroen immo removal methods are apparently not compatible on Ford models...
I even tried to install an emulator Julie Ford, but apparently this is not possible,
Support CarLabImmo : "ECU is in a virgin state - no communication with immobilizer, which means the emulator will not work."
I don't know what to do with this car anymore. Does anyone have a solution for me?
Regards.
RE: Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 - bodzio012 - 25-02-2024
Read dash and give here, I can make you sychro, or any diagnostic tool and change ecu/initiation
RE: Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 - elektronik13 - 25-02-2024
whether the failure is caused by a discharged battery
(25-02-2024, 17:24 PM)ClmPsr14 Wrote: Good morning,If the eeprom failure was caused by a discharged car battery, I can repair this eeprom
I am currently working on Ford Fusion 1.6 TDCi 90 hp year 2005 (HHJB engine), which is equiped by Bosch EDC16C34 ecu.
The car no longer wants to start due to an immobilizer failure.
I tried several immobilizer removal software, no one offered me solution for this type of ECU on Ford.
Is there a solution to remove immo on this type of ECU?
Fiat Peugeot or Citroen immo removal methods are apparently not compatible on Ford models...
I even tried to install an emulator Julie Ford, but apparently this is not possible,
Support CarLabImmo : "ECU is in a virgin state - no communication with immobilizer, which means the emulator will not work."
I don't know what to do with this car anymore. Does anyone have a solution for me?
Regards.
RE: Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 - ClmPsr14 - 25-02-2024
Yes, when I received the car it's battery was completely discharged.
RE: Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 - ombra - 25-02-2024
You will have to read DASH or CEM to sync immo files otherwise write this in ECM as eeprom is suitable with ford diagnosis providing INCODE and OUTCODE.
Pass.PM.Box.
RE: Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 - ClmPsr14 - 25-02-2024
Thanks for your feedback ombra! I will try this and keep you informed.
RE: Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 - ClmPsr14 - 26-02-2024
I did the reading of my dash with Carprog, here in attachement.
It is possible to make it virgin or synchronize it?
RE: Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 - ombra - 26-02-2024
(26-02-2024, 19:14 PM)ClmPsr14 Wrote: I did the reading of my dash with Carprog, here in attachement.
It is possible to make it virgin or synchronize it?
Test file virgin ?
RE: Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 - ClmPsr14 - 26-02-2024
I'm going to try it,
I've already wrote virgin eeprom that you provided me in my ECM.
I will not receive my diagnostic interface for Ford vehicle (OBD Link EX Usb for Forscan) before 3 days.
I wanted to know if I could have gone faster by working on the dash
RE: Ford Fusion 1.6 TDCi 90 hp 2005 EDC16C34 - ClmPsr14 - 03-03-2024
I tried what you advised me to do (Sync dump with incode & outcode), unfortunately it didn't work.
I still havn't found solution that could repair my car
