[carlosabh71]

Which motorcycle model you have?

Since you wrote that is 2018 model and it has BMSE DME, I suppose it is C650 or G310 series. If this is the case then the DME is XBMSE2 and in this case you need ISTA+ or E-Sys. Not ISTA-P or NCS.

I suppose you have OBD2 connector on the bike and not the round one. This means either ICOM or maybe enet. I am using ICOM only and I can not confirm about enet.

thanks for your reply.   bike is a C650GT  09/2018 production.     yes it does have the OBD2 connector not the round connector.
So the kdcan cable is a no-no?    just ICOM  works on this case?    I already test an enet cable  and there is no way it will work because none of the pins are located on same spot as obd connector on bike.