[diagso]

Thanks for feedback and that got me thinking now

Maybe someone could help anwser my doubt based on my work specifics:
- work only with BMW's
- no issues with using Esys/NCS/WinKFP
- not into virginizing
- for cloning/tunning DME/DDE I got scanmatik with PCM Flash

But to the point For starters it might be not wise to buy AutoHex or BMW Explorer and I would like to concentrate on key programing, so here are my doubts:

1. CGDI or VVDI have better support and update frequency (read CT forum and this pushed me away from AutoHex II) ?
2. Will CGDI or VVDI 2 Key (not programer) work with adding EWS keys or I need to dig out my AK90/R270 ? If yes is it bench or OBD ?
3. Not planing to work on other brands so should I drop VVDI 2 and consider only BimTool ?
4. What are differences between VVDI2 versus BimTool - outside of coding/programing ?
5. In which area CGDI is superior to VVDI 2/BimTool ? If I got my research right then it's mainly writing ISN - but is it really working well ?

Thanks!

Your problem is because u buyed cluster with 92k and car have 30k and after coding cluster your km changed with high.....
Need buyed filter and put in cluster,or buy new bdc2 with dealer and virginised cluster with 0km...

Dude read thread and then comment. Ur post is totally useless here.

Thinking and reading don't hurt!

U blind????
Is instaled cluster with high mileage with car.
After coding bdc is with high mileage......
No way for bdc for g series only buy new from dealer or install filter for km....

Do you have some disabilities in regards to reading ?

Can't make it easier for you friend -  please read twice the bolded section from his first post 

"I got on my hands customer who bought supossedly virgnized 6WB cluster to his 2017 G30. Now instead 30k km it shows 92k km after coding in another shop. I tried reinstaling OEM cluster it also displays higher milage, so I guess ECU got updated with higher milage."

@Arejas have already a comprehensive response. If you don't have anything to add then I really recomend refraining from commenting.