[Valery63]

hello
I NEED to read Renesas V850 with clone orange 5 but
error to load HPL file
PLEASE Help for good hpl file thanks

For Orange5 1.36

[Kamardine]

hello
I NEED to read Renesas V850 with clone orange 5 but
error to load HPL file
PLEASE Help for good hpl file thanks

For Orange5 1.36

my orange 5 is 1.35 Clone
sn 0503-1707-01DE-FBA7-FAD7-7832-6DD9-C48D

[petku-cz]

Hello,

is possible to read/write ST+EEP+EXT FLASH in RNS510 with this programmer ?
Existing some script or solution or must pay for Martech ST flasher LїСёи5ё5 ?

[Lifestyle]

i dont think there is adapter for spansion flash
you can do it with tl866 (with adapter)

[armenh7]

Hi.
Orange5 can write chip id to m35160dw?

Did you ever try?

[NikolaIMRS]

hello guys,
so, I have 1.42 orange5 clone, all working good on two PC-s (win11 and win10, already reprogrammed few things, no problem), but cannot get working on third PC (also win11), always getting this errors.
Drivers installed, everything recognized properly.

Anyone have solution? I tried everything.

ajunk.dll

 "Cannot load file libcrypto-3.dll Error:33"

orange.exe - Application Error

The application was unable to start correctly (0xc0000142)

[Ruyke]

hello guys,
so, I have 1.42 orange5 clone, all working good on two PC-s (win11 and win10, already reprogrammed few things, no problem), but cannot get working on third PC (also win11), always getting this errors.
Drivers installed, everything recognized properly.

Anyone have solution? I tried everything.

ajunk.dll

 "Cannot load file libcrypto-3.dll Error:33"

orange.exe - Application Error

The application was unable to start correctly (0xc0000142)

I had some problem messages with virtual mode on one of my PC, even though I did not use the virtual machine. I disabled virtualisation in BIOS, and it worked. Started lдциcнing. Maybe try and compare your BIOS settings with the working machines.

[miler80]

hello
I need to calculate operating hours in BCJ JS220 LC in DCM 3.3+ renesas R5F72544 with clone orange 5 but
error to load HPL file
PLEASE Help for good hpl file thanks 
   

[NikolaIMRS]

hello guys,
so, I have 1.42 orange5 clone, all working good on two PC-s (win11 and win10, already reprogrammed few things, no problem), but cannot get working on third PC (also win11), always getting this errors.
Drivers installed, everything recognized properly.

Anyone have solution? I tried everything.

ajunk.dll

 "Cannot load file libcrypto-3.dll Error:33"

orange.exe - Application Error

The application was unable to start correctly (0xc0000142)

I had some problem messages with virtual mode on one of my PC, even though I did not use the virtual machine. I disabled virtualisation in BIOS, and it worked. Started lдциcнing. Maybe try and compare your BIOS settings with the working machines.

thank you, it worked!!!

[ebt25]

Hello, Before I buy, I'd like to make sure the programmer works with the S6J329. Can anyone confirm this?