Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
coding 2018 bmw bike with ncs expert
26-03-2019, 00:13 AM,
Post: #1
|
|||
|
|||
coding 2018 bmw bike with ncs expert
Hi I tried to update FA code with NCS expert on a 2018 bmw bike to retrofit an alarm module, I got V66 daten files but still it doesnt recognize bike, k-dcan cable makes a connection with INPA and NCS expert tried to read BMSE module but when I try to read FA code it doesnt and gives an error code.
Do sp daten files v66 update have module information for 2018 vehicles? or NCS expert is not the tool of choice to update FA code and retrofit the module? I know that it can be done with ISTA P but I dont have an ICOM to do that. any suggestions on this? |
|||
26-03-2019, 00:17 AM,
Post: #2
|
|||
|
|||
RE: coding 2018 bmw bike with ncs expert
Maybe you should use esys> Esys mode Motor Bike
|
|||
26-03-2019, 00:32 AM,
Post: #3
|
|||
|
|||
RE: coding 2018 bmw bike with ncs expert
(26-03-2019, 00:17 AM)jaramillo Wrote: Maybe you should use esys> Esys mode Motor Bike but forr using esys its with the enet cable? is that correct? because my bike's obd cable pinout is completely differente then enet cable's . my bikes obd port pinout is: pin 5 ground, pin6 CAN high, pin 14 CAN low and pin 16 B+ ENET cable have pins 4-5, 8,11,13. I think it wont work on these bikes. Or can I use Esys with K dcan cable? |
|||
26-03-2019, 00:48 AM,
Post: #4
|
|||
|
|||
RE: coding 2018 bmw bike with ncs expert
Enet or icom. Maybe you can do your own connector and rearange the pinout to read you bike via esys usig enet cable.
Just to clarify that Im not an expert related to motor bikes. |
|||
26-03-2019, 11:03 AM,
(This post was last modified: 26-03-2019, 11:06 AM by ferrum.)
Post: #5
|
|||
|
|||
RE: coding 2018 bmw bike with ncs expert
No no no!
Onli icom + original ICOM-D for a bicycle with a circular connector. For bike with connector obd2 need only ICOM |
|||
26-03-2019, 11:36 AM,
(This post was last modified: 26-03-2019, 11:36 AM by 14TLC.)
Post: #6
|
|||
|
|||
RE: coding 2018 bmw bike with ncs expert
Which motorcycle model you have?
Since you wrote that is 2018 model and it has BMSE DME, I suppose it is C650 or G310 series. If this is the case then the DME is XBMSE2 and in this case you need ISTA+ or E-Sys. Not ISTA-P or NCS. I suppose you have OBD2 connector on the bike and not the round one. This means either ICOM or maybe enet. I am using ICOM only and I can not confirm about enet. |
|||
26-03-2019, 15:43 PM,
Post: #7
|
|||
|
|||
RE: coding 2018 bmw bike with ncs expert
(26-03-2019, 11:36 AM)14TLC Wrote: Which motorcycle model you have? thanks for your reply. bike is a C650GT 09/2018 production. yes it does have the OBD2 connector not the round connector. So the kdcan cable is a no-no? just ICOM works on this case? I already test an enet cable and there is no way it will work because none of the pins are located on same spot as obd connector on bike. |
|||
04-05-2019, 21:07 PM,
Post: #8
|
|||
|
|||
RE: coding 2018 bmw bike with ncs expert
i can confirm that enet is not working and i can confirm that icom next clone work with ista+ and e-sys on 2018 s1000rr and RnineT
i also confirm that on 3rd gen s1000rr (2019) they are not yet working (maybe psdzdata witch is 11/18) |
|||
04-05-2019, 22:45 PM,
Post: #9
|
|||
|
|||
RE: coding 2018 bmw bike with ncs expert
Just curious about this thread: What kind of things could be coded in a bike?
Thanks in advance |
|||
05-05-2019, 09:16 AM,
Post: #10
|
|||
|
|||
RE: coding 2018 bmw bike with ncs expert
not many useful things . as my bike is a race bike i take off cruise control , abs , heated handlebars, lights and when you do this you will have all the warnings in the dash so by coding the dash for abs light not to show , remove from vo heated grips and cruise control and as you crash the dash will get broken and you buy one used you can use tool 32 to pair it with engine ecu (all this for bikes before 15 with ncs ) afer 15 esys and ista+
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw e53 dsc coding | hero3838 | 4 | 45 |
09-05-2024, 20:04 PM Last Post: hero3838 |
|
Motorrad esys coding using ENET and ICOMD cable | bennymx | 17 | 2,932 |
09-05-2024, 11:20 AM Last Post: Vojno |
|
BMW E71 EGS coding 8HP70 used | BS68 | 5 | 350 |
08-05-2024, 11:19 AM Last Post: EngineerX |
|
F25 5AS,8th and 5AC coding with 6wb kombi | simplextibi | 1 | 86 |
04-05-2024, 06:37 AM Last Post: Stratofortress |
|
Bmw F34 trailer hitch coding ? | Cryjack | 2 | 90 |
27-04-2024, 20:27 PM Last Post: dumitru.o |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,133 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
FDL coding BMW Apps | Mugga | 3 | 248 |
26-04-2024, 18:06 PM Last Post: Mugga |
|
Coding a F80 M3 race car | PeterY | 10 | 611 |
25-04-2024, 23:32 PM Last Post: Furgus |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 680 |
24-04-2024, 22:47 PM Last Post: Mugga |
|
6wb cluster swap and coding | xMoses | 4 | 273 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content