[OBDSolutions]

Hi,
I'm looking for solution to FDL code RLM module in G11 LCI. Coding is secured by 16bit crc, any changes in coding made error. 

log:

Caf's werden gesucht

Tal wird generiert
NCD werden gelesen
FDL CAFD-00004744-06.6E.00 signieren.
Abarbeitung wird gestartet

Read SVT before TAL execution started.
Read SVT before TAL execution finished.

TAL execution started.
ExecutionID=2022/02/10-13:22:44.541
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[RLM - 1A] prepareECUforCoding started [PROGRESS]
[RLM - 1A] prepareECUforCoding finished [PROGRESS]
[RLM - 1A] authenticateECUforCoding started [PROGRESS]
[RLM - 1A] authenticateECUforCoding finished [PROGRESS]
[RLM - 1A - cafd_00004744-006_110_000] Transaction type: cdDeploy;  Message: TA started [TRANSACTION]
MCDDiagService<id=62649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : requestOutOfRange, link=RLM_1A_ETHERNET> [DIAGSERVICE]
[] job failed with negative response error: 
 code: repeat job
 description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: RLM_1A_ETHERNET
 severity: ERROR
 [THROWABLE]
[RLM - 1A - cafd_00004744-006_110_000] Transaction type: cdDeploy;  Message: TA finished [TRANSACTION]
[RLM - 1A] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error: 
 code: repeat job
 description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: RLM_1A_ETHERNET
 severity: ERROR
 [WARN]
[RLM - 1A] - [Exception - RLM - 1a] job failed with negative response error: 
 code: repeat job
 description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: RLM_1A_ETHERNET
 severity: ERROR

[RLM - 1A] prepareECUforCoding started [PROGRESS]
MCDDiagService<id=230634, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : conditionsNotCorrect, link=RLM_1A_ETHERNET> [DIAGSERVICE]
[RLM - 1A] prepareECUforCoding finished [PROGRESS]
[RLM - 1A] authenticateECUforCoding started [PROGRESS]
[RLM - 1A] ECU Authentication error: seed empty or not available [PROGRESS]
[] ECU Authentication error: seed empty or not available [THROWABLE]
[RLM - 1A] There was an error during TAL execution, please check the log files. [WARN]
[RLM - 1A] There was an error during TAL execution, please check the log files. [WARN]
[RLM - 1A] - [Exception - RLM - 1a] ECU Authentication error: seed empty or not available
[RLM - 1A] finalizeECUCoding started [PROGRESS]
[RLM - 1A] finalizeECUCoding finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - RLM - 1a] ECU Authentication error: seed empty or not available
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "16s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.
Abarbeitung beendet

[jb2005]

What launcher are you using?

[OBDSolutions]

i'm using esysx

[kklobo]

did You solve this i need code usa lights to work with ece standards after changing red to yellow leds of course problem is brake is working with turn signal after coding outside lights to ece Typeschlussel brake and turn will separate but upper position led disappear

[Bagum4uk]

US and EU are different parts, so you should to change them to ECE

[kklobo]

i now that parts number are different but i'm changing red to yellow leds from 2010 in poland there is big market for that type of services but in this car bmw it makes it very difficult

[jaki]

A bit different problem:
Car is JPN G11 from 2015.
Only thing I like to code is DRL's (front light) on when in "Auto" light switch and in daylight.
Currently there is no lights at all.
When it is dark, currently everything is ok.

[fl3xy]

did You solve this i need code usa lights to work with ece standards after changing red to yellow leds of course problem is brake is working with turn signal after coding outside lights to ece Typeschlussel brake and turn will separate but upper position led disappear

is possible to do

[kklobo]

with coding ? or changing wiring?